Omron H3CR-A Timer
Omron H3CR-A Timer

Omron H3CR-A Timer

Multiple Operating Modes and Multiple Time Ranges.

DIN 48 x 48-mm Multifunctional Timer.

Voltage supply
H3CR-A AC24-48/DC12-48
S$59.00

OutputSupply voltageInput typeTime rangeOperating mode *2Model *1
Contact 100 to 240 VAC (50/60 Hz)/
100 to 125 VDC
No-voltage
input
0.05 s to 300 h Eight multi-modes:
A, B, B2, C, D, E, G, J
H3CR-A
24 to 48 VAC (50/60 Hz)/
12 to 48 VDC
100 to 240 VAC (50/60 Hz)/
100 to 125 VDC
Voltage input Eight multi-modes:
A, B, B2, C, D, E, G, J
H3CR-AP
24 to 48 VAC (50/60 Hz)/
12 to 48 VDC
100 to 240 VAC (50/60 Hz)/
100 to 125 VDC
No-voltage
input
0.1 s to 600 h H3CR-A-301
24 to 48 VAC (50/60 Hz)/
12 to 48 VDC
Transistor
(Photocoupler)
24 to 48 VAC (50/60 Hz)/
12 to 48 VDC
0.05 s to 300 h H3CR-AS



General

ItemH3CR-A/-AS/-A-301H3CR-APH3CR-A8/-A8S/-A8-301H3CR-A8E
Operating mode A: ON-delay
B: Flicker OFF start
B2: Flicker ON start
C: Signal ON/OFF-delay
D: Signal OFF-delay
E: Interval
G: Signal ON/OFF-delay
J: One-shot
A: ON-delay (power supply start)
B: Flicker OFF start (power supply start)
B2: Flicker ON start (power supply start)
E: Interval (power supply start)
J: One-shot (power supply start)
Pin type 11-pin 8-pin
Input type No-voltage input Voltage input ---
Time-limit output type H3CR-A/-A8/-AP/-A-301/-A8-301: Relay output (DPDT)
H3CR-AS/-A8S: Transistor output (NPN/PNP universal) *1
Relay output
(SPDT)
Instantaneous output type --- Relay output
(SPDT)
Mounting method DIN track mounting, surface mounting, and flush mounting
Approved standards UL508, CSA C22.2 No.14, NK, Lloyds, CCC: GB/T 14048.5 *2
Conforms to EN61812-1 and IEC60664-1 (VDE0110) 4kV/2.
Output category according to EN60947-5-1 for Timers with Contact Outputs.
Output category according to EN60947-5-2 for Timers with Transistor Outputs.

Dimensions

5 Items

You might also like

Product added to compare.

This site uses cookie to enhance your surfing experience.

Please read the Privacy and Cookie Policy for more information.