Omron E5CC PID controller

Omron E5CC PID controller

Omron E5CC temperature controller

Voltage supply
Control output
Signal input type
Frame Size

Key features

  • High-contrast, white LCD display visible from large distances and from any angle
  • Easy to set up, and operate intuitively via CX-Thermo without power supply
  • 50 ms sampling period for fast and precise regulation
  • Functions for diagnosis for secure operations *
  • Useful timer and logic operation functions eliminating the need of a PLC
* Alarm for loop break or PV change rate, heater burnout or sensor burnout detection 

Model Control output 1 Supply voltage Event inputs Heater burnout Comm. Aux output
E5CC-RX2ASM-800 Relay output 100-240 VAC - - - 2
E5CC-QX2ASM-800 Voltage output
E5CC-CX2ASM-800 Current output
E5CC-RX2DSM-800 Relay output 24 VAC/DC
E5CC-QX2DSM-800 Voltage output
E5CC-CX2DSM-800 Current output
E5CC-RX2ASM-801 Relay output 100-240 VAC 2 1
E5CC-QX2ASM-801 Voltage output
E5CC-RX2DSM-801 Relay output 24 VAC/DC
E5CC-QX2DSM-801 Voltage output
E5CC-RX2ASM-802 Relay output 100-240 VAC - RS-485
E5CC-QX2ASM-802 Voltage output
E5CC-RX2DSM-802 Relay output 24 VAC/DC
E5CC-QX2DSM-802 Voltage output
E5CC-CX2ASM-804 Current output 100-240VAC 2  
E5CC-CX2DSM-804 Current output 24 VAC/DC  


Power Supply Votage A in model number: 100 to 240 VAC, 50/60 Hz
D in model number: 24 VAC, 50/60 Hz; 24 VDC
Operating voltage range 85% to 110% of rated supply voltage
Sensor input Models with temperature inputs
Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II
Platinum resistance thermometer: Pt100 or JPt100
Infrared temperature sensor (ES1B): 10 to 70°C, 60 to 120°C, 115 to 165°C, or 140 to 260°C
Analog input
Current input: 4 to 20 mA or 0 to 20 mA
Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V
Input impedance Current input: 150 ? max., Voltage input: 1 M? min.
(Use a 1:1 connection when connecting the ES2-HB/THB.)
Control method ON/OFF control or 2-PID control (with auto-tuning)
Control output Relay SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations,
minimum applicable load: 5 V, 10 mA
Voltage Output voltage: 12 VDC ?20% (PNP), max. load current: 21 mA, with short-circuit protection circuit
Current 4 to 20 mA DC/0 to 20 mA DC, load: 500 ? max., resolution: approx. 10,000
Auxillary output No. of output 2
Spec N.O. relay outputs, 250 VAC, Models with 2 outputs: 3 A (resistive load),
Electrical life: 100,000 operations, Minimum applicable load: 10 mA at 5 V
Event input No. of input 2 or 4 (depends on model)
External contact input spec Contact input: ON: 1 kΩ max., OFF: 100 kΩ min.
Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.
Current flow: Approx. 7 mA per contact
Setting method Digital setting using front panel keys
Indication method 11-segment digital display and individual indicators
Character height: PV: 15.2 mm, SV: 7.1 mm
Multi SP Up to eight set points (SP0 to SP7) can be saved and selected using event inputs, key operations, or serial communications.
Other functions Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, 40% AT, 100% AT, MV limiter, input digital filter, self tuning, PV input shift, run/stop, protection functions, extraction of square root, MV change rate limit, temperature status display, moving average of input value, and display brightness setting
Ambient operating temperature -10 to 50 °C (with no condensation or icing)
Ambient operating humidity 25% to 85%
Storage temperature -25 to 65°C (with no condensation or icing)

You might also like

Product added to compare.

This site uses cookie to enhance your surfing experience.

Please read the Privacy and Cookie Policy for more information.